Wood Radiator Covers

Our wood covers are energy efficient, affordable, beautiful

 

and manufactured

in the heart of Pennsylvania
Dutch Country by Amish Craftsmen.

  

 

  •  SMK Wooden Radiator Covers are custom made pieces of furniture.
  • Our wood radiator covers are made using 3/4" solid hardwoods.  We use        no MDF, Veneers, particle board, or soft woods like Pine.
  • Our styles include: 
  • Contemporary with a grecian metal grill
  • Prairie with an all wood picket grill 
  • Mission with wood picket grill
         on front and sides, 1 1/2" square legs and 1"thick lid.
  • Prairie and Mission picket grills are 3/4" with 3/4" spacing.
  • Natural wood radiator covers are made with Red Oak, Maple or
         Cherry.  Select the stain color of your choice.
  • Painted radiator covers are made with Poplar and finished Satin
         White.
  • The finish on our wooden radiator covers is convertion varnish
         which forms a tough stain resistant finish.
  • Leg styles are square, rounded or angled.
  • Prairie grill can include a wider, center divider panel or all
         continuous pickets.
  • Lid corners are square or rounded.
  • You can order body corners routed.
  • Safety Features for Young Children and Older Adults Include  
         Rounded Corners on lids.
  • Decorative to "Dress up your Radiators".
  • Bookends Available.
  • Recessed (in-wall) Radiator Covers Available.
  • Residential, Institutional and Commerical Covers.
  • 4 - 6 Week Delivery.
  • Guaranteed Quality and Service.
  • On-Site Measuring and Installation Available.
  • Baseboard Heater replacement covers available.

Measuring Instructions for Wood Radiator Covers




Note:
 All wood covers are made using 3/4" hardwoods.  A minimum of  two inches clearance on all three dimensions for wood is necessary for a proper fit.


A. Length

Measure any and all valves and pipes on both ends, add at least three inches.

    For Mission Style:  Add at least four inches to the length.

B. Height
Measure from floor to top of your radiator or valves. Add at least two inches. 

C. Depth
Measure from wall or baseboard to front of radiator. Be sure to measure both sides, add at least two inches to the deeper measurement.

 

D. Lid Dimensions

Standard lid uses 3/4" overhang on front and sides and flush in the back.   If you want the lid to touch the wall add desired overhang in the back.  ie. basboard is 2'' deep, add 2" overhang in back.

 

     For Mission Style:  The standard lid overhang on the sides is three 
     inches, be sure you have the room to support this extra length.

 

Contact Us

SMK Enterprises, Inc.
PA Main Office:
    717-656-6297 or
    877-768-8072 (toll free)
 
P.O. Box 8
Leola, PA 17540

 

frankwerts@smkenterprises.org

 

Order Form

SMK Fillable Order Form
SMK fillable order form.doc
Microsoft Word document [202.5 KB]

Availability

We are Lancaster County's local source for custom radiator covers.
We serve all of east & central Pennsylvania 
We travel to Philadelphia, Pa and surrounding areas at least once a week. 
We regularly visit Baltimore Maryland, Wilmington Delaware, Washington D.C., Southwest New Jersey, and Northern VA.

 

 

 

 In the Rhode Island area you can purchase our radiator covers at:

Lakeside Trading LLC

326 South Pier Rd.

Narragansett, RI 02882

401-789-9350

 
      We can ship to
   anywhere in the USA
 
We travel regularly to measure & deliver to
Philadelphia and the surrounding Suburbs
Wilmington
Baltimore
South and Central New Jersey
Harrisburg
Reading
Allentown
Washington DC
And areas within approximately 100 miles of Leola , PA
If you are outside our normal travel areas, ask and we may be able to come to you.
 
 
 

Visitors

     as of 10 Jan 2011 

Print | Sitemap
© SMK Enterprises

This website was created using IONOS MyWebsite.